JL Audio 10W6 Recone Kit + Install Kit - NOT for 10W6v2

Kit shown in photo is specific to this speaker except for the dust cap with JL Audio logo, as it is no longer available. A 4.5" plain black poly cap will be included. You can also reuse your original cap.


**NOTES**

#1 - Kit includes all the adhesives, shims, and wires needed.
#2 - This is NOT a drop-in kit - this is a professional kit.
#3 - Step-by-step instructional video can be viewed on our DIY instructions page.
#4 - Dust cap will be plain black, and 4.5" in diameter, NOT the picture JL Audio cap.


THIS IS A NOT A PRE-ASSEMBLED DROP-IN KIT

Kit includes:
1 - 10W6 Foam Surround (You MUST reuse your original cone)
1 - Dual 6 Ohm voice coil
1 - JL Audio spider
1 - Plain Black Poly 4.5" Dust cap
1 - Vinyl-finish chip speaker gasket
1 - Bottle of professional-grade CA Adhesive (For voice coil)
1 - Spray bottle of CA Adhesive Activator
1 - Bottle of professional-grade rubber speaker adhesive
8 - Large speaker shims
2 - Tin application brushes
2 Ft of lead wire rated up to 3500W peak
2 Pieces of shrink tube to coat your lead wire


THIS IS A NOT A PRE-ASSEMBLED DROP-IN KIT